Total Refurbish of Trashed Fly Deluxe

Show and tell! This is a place to showcase your Parker guitar! New members are encouraged to introduce themselves here.
Post Reply
User avatar
Fly Rod
Senior Member
Posts: 216
Joined: Tue Sep 07, 2021 8:44 am
Location: The Wood Shed

Re: Total Refurbish of Trashed Fly Deluxe

Post by Fly Rod »

I was an auto body repairman for decades

Titebond Epoxy CA Glue & Fiberglass are your friends :D
FLY ROD Formerly FLY Wheel
User avatar
Fly Rod
Senior Member
Posts: 216
Joined: Tue Sep 07, 2021 8:44 am
Location: The Wood Shed

Re: Total Refurbish of Trashed Fly Deluxe

Post by Fly Rod »

Trying to illustrate the crack I saw inside the body were the treble sides tremolo bushing fits that runs out to the trem rout, It runs to the hole drilled for the piezo wire, I clamped the crack as much as I could & dripped the #10 fast setting CA glue into the crack several times, The photo where you can see the light in the crack I used a small flashlight to make it show up.
It sealed it up nicely & I am going to paint over it to seal it all up.
Was thinking that an insert with a set screw might be an answer for the leaning post issue?
I will note that the nylon stabilizer bushings are too large on the OD Outside Diameter & are also too long for the bushing to be countersunk slightly.
Will have to spin the nylon bushings & cut the OD down & mill them shorter in a drill Mandel.
Still working on getting the patch blended into the body with lots of sanding & time.

In This Photo you can see the body filler I had to ad to get the contour right were the patch meets the tremolo bridge
20211216_025505.jpg
Thought I MIGHT want to raise the pickups so I made up two thin foam inserts to match the pickups opening JUST IN CASE
20211214_114106.jpg
Crack
20211214_044556.jpg
20211214_042952.jpg
FLY ROD Formerly FLY Wheel
User avatar
Fly Rod
Senior Member
Posts: 216
Joined: Tue Sep 07, 2021 8:44 am
Location: The Wood Shed

Re: Total Refurbish of Trashed Fly Deluxe

Post by Fly Rod »

Got the fly face primed with black primer
No Pictures YET

MERRY CHRISTMAS
one minute till 12/25/21
FLY ROD Formerly FLY Wheel
User avatar
jb63
Forum Veteran
Posts: 256
Joined: Fri Sep 13, 2019 10:03 pm
Location: SLC

Re: Total Refurbish of Trashed Fly Deluxe

Post by jb63 »

STILL my favorite thread!
just plain lost
User avatar
vjmanzo
Site Admin
Posts: 1996
Joined: Sat Feb 02, 2019 12:35 pm
Location: New York, NY
Contact:

Re: Total Refurbish of Trashed Fly Deluxe

Post by vjmanzo »

jb63 wrote: Sat Dec 25, 2021 2:13 pm STILL my favorite thread!
Agreed—@Fly Rod had me at the “I ❤️ trash” avatar!

🤣🤣🤣🤣
User avatar
Fly Rod
Senior Member
Posts: 216
Joined: Tue Sep 07, 2021 8:44 am
Location: The Wood Shed

Re: Total Refurbish of Trashed Fly Deluxe

Post by Fly Rod »

More sanding required to feather out the finish cracks & sculpt the lower horn + blend it all together
Didn't get much time at Christmas as I was the Chef Today
20211225_085546.jpg
20211225_085542.jpg
More to Come

Oscar The Grouch loves finding Parker Flys in the trash or any guitar
All the ones in that last photo were found in the trash except the Jackson
FLY ROD Formerly FLY Wheel
User avatar
vjmanzo
Site Admin
Posts: 1996
Joined: Sat Feb 02, 2019 12:35 pm
Location: New York, NY
Contact:

Re: Total Refurbish of Trashed Fly Deluxe

Post by vjmanzo »

Looking great!!! Keep it up!
Fly Rod wrote: Sun Dec 26, 2021 3:41 am All the ones in that last photo were found in the trash except the Jackson
I love that!! You’re giving these instruments a second chance—fantastic!
User avatar
Fly Rod
Senior Member
Posts: 216
Joined: Tue Sep 07, 2021 8:44 am
Location: The Wood Shed

Re: Total Refurbish of Trashed Fly Deluxe

Post by Fly Rod »

I Gave a Guitar yesterday to someone who couldn't afford one.
Made Me Feel Really Good
MERRY CHRISTMAS

It was this Black & White One
Don't Recall The Name Brand, Marquis??
I had maybe $10 in it, Including strings
Those were 3 for $20 when I got them
Made His Day!!
Student Guitars.JPG
FLY ROD Formerly FLY Wheel
User avatar
vjmanzo
Site Admin
Posts: 1996
Joined: Sat Feb 02, 2019 12:35 pm
Location: New York, NY
Contact:

Re: Total Refurbish of Trashed Fly Deluxe

Post by vjmanzo »

Does that make you Strato-Claus?! 🎅
User avatar
Fly Rod
Senior Member
Posts: 216
Joined: Tue Sep 07, 2021 8:44 am
Location: The Wood Shed

Re: Total Refurbish of Trashed Fly Deluxe

Post by Fly Rod »

It's a Good Feeling to give the instruments a 2nd chance & to give back by giving some away.
The Guy who received the Marquis would pawn it if it were worth more than $20.
It was the perfect guitar for him & even gave him a cheap gig bag, strap & a few picks
After looking at a B.C. Rich my son just got with its Black metal flaked finish, we might go with that on this Parker Fly

OT = Wife & I got our Covid 19 Pfizer boosters yesterday morning on Tuesday the 28th = 3rd So Far

Here's the B.C. Rich Pro X Eagle, It has some serious multi color flakes over the black finish & plays absolutely great too
B.C. Rich Eagle.jpg
B.C. Rich Eagle Serial #.jpg
I got my son a stand for his Steinberger XP-2 bass + a new gig bag for it too
Bought my Wife a Dishwasher
I also bought her some clothes & jewelry + a few other goodies
FLY ROD Formerly FLY Wheel
User avatar
Fly Rod
Senior Member
Posts: 216
Joined: Tue Sep 07, 2021 8:44 am
Location: The Wood Shed

Re: Total Refurbish of Trashed Fly Deluxe

Post by Fly Rod »

HAPPY NEW YEAR FLY CLONE
Next Year the 2007 Parker Fly Deluxe will be 100% repaired
FLY ROD Formerly FLY Wheel
User avatar
vjmanzo
Site Admin
Posts: 1996
Joined: Sat Feb 02, 2019 12:35 pm
Location: New York, NY
Contact:

Re: Total Refurbish of Trashed Fly Deluxe

Post by vjmanzo »

💜💜💜💜💜💜💜💜💜
User avatar
Fly Rod
Senior Member
Posts: 216
Joined: Tue Sep 07, 2021 8:44 am
Location: The Wood Shed

Re: Total Refurbish of Trashed Fly Deluxe

Post by Fly Rod »

Been working on he opening for the tremolo using the trem & replacement to work on it.
Slow sanding & rounding the corners perfectly
Using a straight board to get the front edge flat & straight
Lots more work needed but getting closer
Need to go to Wolf Glass &Paint
20220109_212015.jpg
20220109_205013.jpg
20220109_204922.jpg
20220109_204051.jpg
20220109_204027.jpg
FLY ROD Formerly FLY Wheel
User avatar
Fly Rod
Senior Member
Posts: 216
Joined: Tue Sep 07, 2021 8:44 am
Location: The Wood Shed

Re: Total Refurbish of Trashed Fly Deluxe

Post by Fly Rod »

More Photos
20220109_205022.jpg
20220109_204928.jpg
20220109_204915.jpg
20220109_204043.jpg
20220109_204017.jpg
FLY ROD Formerly FLY Wheel
User avatar
Fly Rod
Senior Member
Posts: 216
Joined: Tue Sep 07, 2021 8:44 am
Location: The Wood Shed

Re: Total Refurbish of Trashed Fly Deluxe

Post by Fly Rod »

One More
20220109_212028.jpg
FLY ROD Formerly FLY Wheel
User avatar
Fly Rod
Senior Member
Posts: 216
Joined: Tue Sep 07, 2021 8:44 am
Location: The Wood Shed

Re: Total Refurbish of Trashed Fly Deluxe

Post by Fly Rod »

Got around to working on the Fly this afternoon
Decided I needed to dismantle & clean the bridge because I want to mount it to get the gaps perfect
So I removed the six allen screws & unsoldered each saddle from the bridge
Started to sand out the marks in the bridge
I want to coat the bridge before I mount the new bearings & pins
I'm thinking of an industrial paint used on firearms called dura coat
I will plug the string holes to not allow any paint in there because of the needed ground of the strings balls for the piezo

Still need to get some sandpaper, sealer, paint & clear coat

My Good Ole Buddy Steve a Vietnam Veteran Passed last Saturday right as we showed up to see him
I knew there was trouble & went to see him

Here's a few photos taken today while i was working on the Fly Deluxe
Gary
20220117_173511.jpg
20220117_184332.jpg
20220117_190852.jpg
20220117_175640.jpg
20220117_184730.jpg
FLY ROD Formerly FLY Wheel
User avatar
Fly Rod
Senior Member
Posts: 216
Joined: Tue Sep 07, 2021 8:44 am
Location: The Wood Shed

Re: Total Refurbish of Trashed Fly Deluxe

Post by Fly Rod »

One more photo of the removed saddles before I cleaned them up with a small brass brush
20220117_200016.jpg
NOTE: The D String saddle doesn't have the dot on it like the other five do?
They are all the same height & the radius is built into the bridge & no height adjustment for each saddle like other guitars
GENIUS
FLY ROD Formerly FLY Wheel
User avatar
Fly Rod
Senior Member
Posts: 216
Joined: Tue Sep 07, 2021 8:44 am
Location: The Wood Shed

Re: Total Refurbish of Trashed Fly Deluxe

Post by Fly Rod »

Sanding down the stabilizer bushings before installing the bridge post bushings
Took them down to .1805"
20220118_214353.jpg
20220119_134330.jpg
FLY ROD Formerly FLY Wheel
User avatar
Fly Rod
Senior Member
Posts: 216
Joined: Tue Sep 07, 2021 8:44 am
Location: The Wood Shed

Re: Total Refurbish of Trashed Fly Deluxe

Post by Fly Rod »

Getting Ready to install the stabilizer bushings & tremolo bushings
Waiting on a few more parts from G-Man
20220126_175641.jpg
20220126_175646.jpg
FLY ROD Formerly FLY Wheel
User avatar
Jack T
New Member
Posts: 14
Joined: Thu Oct 14, 2021 6:02 am

Re: Total Refurbish of Trashed Fly Deluxe

Post by Jack T »

A work of passion. Amazing stuff... all the best, buddy. I'll be following this! :P
Fly Supreme (Honey Trans), Fly Jazz Hardtail, Fly Bronze, Fly Concert, Spanish Fly,
and some other inferior guitars such as Taylor, Steinberger, Gibson, Kiesel :lol:
Post Reply