"Bullwinkle" guitar hanger

[vjmanzo]

Hi @collin_feral, these routinely come up for sale on eBay.

[Fly Rod]

Here's one of the 3D Printed Versions of the Bullwinkle Guitar Hanger
$20 on eBay
https://www.ebay.com/itm/165038146365?h ... Sw~FZgBeTe

[ilanberman]

Still have any of these available?

[mmmguitar]

Still have any of these available?

Though This seller hasn’t visited the site in nearly two years, there’s an email in their post that you can try contacting them at. Your best bet at the moment may be to solicit in the Parker Guitars or Parker Guitar Owners and Lovers Facebook groups.

[william.shakour]

If anyone in the UK is interested in 3mm acrylic version please ping me. The only reason I say "in the UK" is because recently postage has gone nuts. If you are happy to pay the shipping: np.

I have a picture on Instagram... Tested with prerefined parker fly and it works beautifully.

[DownRight]

Hello all,
I'm an excited, soon to be Parker Fly owner (currently in transit) and was looking into purchasing a Bullwinkle to use with a Hercules stand.

After doing a little research, I found that the grooves on original and clones are a bit too narrow for that stand, so I've done a bit of 3D modeling and have come up with my own clone from the original design.

After verifying that everything fits properly, I'll share the STL with the group.

They also fit these wall mounts that I bought from Amazon

[DownRight]

Hello all,

Well, the reference I used to model the previous version was waaaaaay off. I wonder if it was the Bass model or something.

I've since re-designed it using my own measurements since I now have my Fly to reference, and have uploaded the "beta" version here on Thingiverse

All in all it's working great, but the one thing I don't like is that if I just want to pick up my Fly from the stand to start playing, the Bullwinkle drops to the ground unless I remember to grab it at the same time. I might make some minor changes so that it either snaps onto the tuners or the stand... not sure which I'd prefer yet.

I also wonder if it's worth adding in slots for all six tuners, or if that's just overkill.

I'll plan to make another variation that works with more traditional guitar stands than this one, which has dimensions suited for a Hercules stand, or similar.

[Patzag]

The guitar stand I use - same as yours - came with a pair of spacers to make the neck opening smaller - as if to fit a banjo. It is small enough to hold my Fly in place without bullwinkle. The tuner rests on the grip and holds the guitar up. I'll put up a photo when I get a chance.

[DownRight]

The guitar stand I use - same as yours - came with a pair of spacers to make the neck opening smaller - as if to fit a banjo. It is small enough to hold my Fly in place without bullwinkle. The tuner rests on the grip and holds the guitar up. I'll put up a photo when I get a chance.

Interesting, I'm sure I still have those somewhere as well. I would have thought they would press on the strings, though.

[DownRight]

Hah, I found mine and of course, you're absolutely right... that's all it takes for these to work really well with a Fly neck and it looks like if you rest the first tuner on the back of the rest, there's no chance that it could slip and interfere with the strings.