Hexaphonic piezo rewiring?

Parts, mods, projects, and requests/concepts based on adaptations of Fly parts
Post Reply
rsdio
New Member
Posts: 39
Joined: Tue May 26, 2020 3:19 am

Hexaphonic piezo rewiring?

Post by rsdio »

I need to stop coming up with new ideas for modifications, and get to playing. That said...

Has anyone rewired the piezo bridge to separate the six strings into individual channels? That would surely require a 13-pin jack or other multi-channel wire, but it seems possible. Each piezo bridge piece starts with its own wire.

I'm curious whether anyone has tried modifying the piezo wiring, even just to split it into stereo.

I probably won't be starting any kind of project like this for a while, but I still have my thinking cap on...
Fly Deluxe '97, Fly Supreme '98
User avatar
vjmanzo
Site Admin
Posts: 2101
Joined: Sat Feb 02, 2019 12:35 pm
Location: New York, NY
Contact:

Re: Hexaphonic piezo rewiring?

Post by vjmanzo »

I think the Graphtech Ghost System lends itself to this very easily. I’d have to check the manual to be sure, but I think the 13-pin output should carry the discrete string signals on six different pins.
rsdio
New Member
Posts: 39
Joined: Tue May 26, 2020 3:19 am

Re: Hexaphonic piezo rewiring?

Post by rsdio »

My Godin Freeway SA has the Ghost system, and I like it. You're right: Each string has its own channel on the 13-pin connector. As a bonus, there is a 7th audio channel that carries the magnetic pickup signals like a standard, passive guitar's mono output. You probably know that the 13-pin carries power, too, so that eliminates the battery.

I didn't realize that the Fly has a Graphtech Ghost system. I'd assumed that it was custom because of the fixed height that matches the fretboard curvature. Maybe it's just the piezo elements that are Graphtech?

p.s. I've designed a couple of outboard preamps that convert the 7 audio channels from a 13-pin connector to balanced audio - either on TRS or DB-25 - as well as providing power to the guitar. This works well when you want the raw audio instead of being tied to something like the Roland GR-50 Guitar Synthesizer.
Fly Deluxe '97, Fly Supreme '98
User avatar
vjmanzo
Site Admin
Posts: 2101
Joined: Sat Feb 02, 2019 12:35 pm
Location: New York, NY
Contact:

Re: Hexaphonic piezo rewiring?

Post by vjmanzo »

Hi @rsdio, yes, the later Flys used both the Graphtech piezo elements and the Ghost system; a summary of the Fly changes through the years is available here.

Somewhat related, I'm also interested in multiple timbres, so I've designed a multi-channel guitar jack that is the exact size of the Fly output jack:

rsdio
New Member
Posts: 39
Joined: Tue May 26, 2020 3:19 am

Re: Hexaphonic piezo rewiring?

Post by rsdio »

Wow!
Fly Deluxe '97, Fly Supreme '98
rsdio
New Member
Posts: 39
Joined: Tue May 26, 2020 3:19 am

Re: Hexaphonic piezo rewiring?

Post by rsdio »

vjmanzo wrote: Sun May 31, 2020 7:28 pm yes, the later Flys used both the Graphtech piezo elements and the Ghost system; a summary of the Fly changes through the years is available here.
Ah, right:
the Graphtech signal noise is potentially compounded by using the original non-Graphtech Fly saddles with the original Fishman piezo elements.
I hope to separate the signals from the original Fishman piezo elements, without changing any of the mechanical aspects of the setup. I also might create some custom electronics rather than try to drop in a Ghost pcb as-is. But, it will be a while before I start that project.
Fly Deluxe '97, Fly Supreme '98
Post Reply