NiteFly NFV1 electronics - reverting to the original.

Discussions of the NiteFly NFV1-8, NFV-M, and NFV-SA models
Post Reply
Majadero
New Member
Posts: 5
Joined: Mon Oct 11, 2021 7:47 pm

NiteFly NFV1 electronics - reverting to the original.

Post by Majadero »

Hi!

This is my first post.
I have played Parker NiteFly NFV1 for about a year and would like to revert its electronics to the original wiring.

Has anybody have in archives the photos of the guitar inside?
Or just a schematics? Somehow I can't find it anywhere.

My guitar has been modified by a previous user with the kill switches, also the piezo can be mixed in in mono.

Thanks!
parker1.jpg
parker2.jpg
parker3.jpg
User avatar
vjmanzo
Site Admin
Posts: 1995
Joined: Sat Feb 02, 2019 12:35 pm
Location: New York, NY
Contact:

Re: NiteFly NFV1 electronics - reverting to the original.

Post by vjmanzo »

Hi and welcome!

Did you see this post? Might be a good place to start.
Majadero
New Member
Posts: 5
Joined: Mon Oct 11, 2021 7:47 pm

Re: NiteFly NFV1 electronics - reverting to the original.

Post by Majadero »

Hi! Thanks, I have seen it - that guitar according to the owner has got "a wiring fault" - so I am not sure I can take it as a point of reference.
Droptune
New Member
Posts: 23
Joined: Mon Sep 27, 2021 1:00 pm

Re: NiteFly NFV1 electronics - reverting to the original.

Post by Droptune »

Majadero wrote: Fri Nov 12, 2021 6:57 am Hi! Thanks, I have seen it - that guitar according to the owner has got "a wiring fault" - so I am not sure I can take it as a point of reference.
Hello @Majadero I am the owner of that NFV1 and I actually am getting it sorted out hopefully next week or the following week! Once I exactly pin down where the fault is I'll be sure to update that wiring diagram I made in that post. I've been waiting on a few small parts so I'm excited to get this sorted finally! There is very little information it seems on the NFV1/NFV2's so once I have mine sorted I'll do my best to make a wiring "summary" post for future owners.

Thanks
User avatar
vjmanzo
Site Admin
Posts: 1995
Joined: Sat Feb 02, 2019 12:35 pm
Location: New York, NY
Contact:

Re: NiteFly NFV1 electronics - reverting to the original.

Post by vjmanzo »

Droptune wrote: Fri Nov 12, 2021 8:22 am There is very little information it seems on the NFV1/NFV2's so once I have mine sorted I'll do my best to make a wiring "summary" post for future owners.
💜🙏
Majadero
New Member
Posts: 5
Joined: Mon Oct 11, 2021 7:47 pm

Re: NiteFly NFV1 electronics - reverting to the original.

Post by Majadero »

Hello @Droptune - thanks, it will help a lot!

I am just making a basic 3 sc wiring right now.
Do you know what was the capacitor value in NFV1?
drssyoon
New Member
Posts: 6
Joined: Sun Aug 02, 2020 12:43 pm

Re: NiteFly NFV1 electronics - reverting to the original.

Post by drssyoon »

Thanks for solving this. Anxiously waiting...
moreteavicar
New Member
Posts: 7
Joined: Wed Dec 01, 2021 7:39 am

Re: NiteFly NFV1 electronics - reverting to the original.

Post by moreteavicar »

Hi, if it helps here's a photo of the wiring from my NFV1 (pre Ghost modification) - its pretty much the same as SSS strat except for the Piezo feed
IMG_4964.JPG
Majadero
New Member
Posts: 5
Joined: Mon Oct 11, 2021 7:47 pm

Re: NiteFly NFV1 electronics - reverting to the original.

Post by Majadero »

Thanks a lot!!!
Majadero
New Member
Posts: 5
Joined: Mon Oct 11, 2021 7:47 pm

Re: NiteFly NFV1 electronics - reverting to the original.

Post by Majadero »

moreteavicar wrote: Wed Dec 01, 2021 10:53 am Hi, if it helps here's a photo of the wiring from my NFV1 (pre Ghost modification) - its pretty much the same as SSS strat except for the Piezo feed

IMG_4964.JPG
Could you tell me what are capacitors values or codes?
Thanks...
Post Reply