Thanks VJ, I will look into that or just have the lady make them from photos with a ruler Been sanding more & had to add epoxy in a few small areas, got that crud all over my fingers & got it off with a towel & then acetone I think it's better than auto body filler & way harder &...

I want to try an get the three white stickers made for the front & back of the Parkers headstock + the serial # The lady who made my Takamine Logo said if I take a photo with a ruler, she can reproduce it in vinal Takamine Emblem V.JPG Here's a photo of the Eastwood Spectrum 5 Daisy & Buffy ...

My son just picked up a blue Eastwood Spectrum 5 for his upcoming 31st birthday & did a setup on it yesterday with .010" Nanoweb strings It has a tremolo that is very Fender Jaguar/Jazzmaster like My Takamine is finished & hanging ready for the studio I got back on the Fly this morning ...

Worked on sculpting the lower horn & grain filled the bare wood I exposed with Timber Mate
Moved the Parker to the stand
Cleaned the worktable 1/2 off & covered the Takamine

Painted the bridge one coat of Matte Black, More to come..
Sanding out some cracks in the finish that mate with the grain of the poplar
Then filled them with #10 CA Glue & have now scraped it back
MORE SANDING Coming
12:00 NOON Now Thursday 6/30/22
Gary

I could make a mold of the Fly's face with foam fill & a piece of plastic sheeting & convert a similar case into a $300-$400 case :o Need to have a Parker Guitars stencil made for these Gig Bags & Cases There are these stickers on Reverb https://reverb.com/item/51954351-parker-fly-guitar...

Saw a Black Pre Refined Parker Fly Deluxe sell for $2600 :o So Decent prices are abounded if $2600 is a good price :lol: Its spring was rusty :o Needs replaced right away IMO OR~~~ https://cdn.shopify.com/s/files/1/1304/0581/products/IMG_6542_b6adba3c-92fe-4654-ab39-a364e246364e.jpg?v=1625175986 The...

Page 9 WOW!! Started scuffing up the primered bridge & it looks very good & matte, might spray a 2nd coat & work it over with the scotch brite pads & not spray paint on it to make it real shiny.... Going to take it outside & spray more primer on the bridge & let it sit in the...

Was just looking on eBay & Reverb for Parker Flys & their prices WOW!! $2222.00 - $5528.43 SHAZAM~~~ Doesn't seem to matter if they are Refined or Pre Refined but have seen more Pre Refined than the later Mojo, Classic, Deluxe, Classic, Custom Classic & Stealth... Also noticed that many ...

Well, it's back on working a bit on the Parker Fly Deluxe after the Takamine New Yorker Took the bridge back apart & masked & primed it with black + a few passes on the Flys Body & carried it back in need a good coat to work the body spots out & have much more sanding coming this wee...

38 Springs sold in a month @ Billy's Shop
Wonder how many he had manufactured?
100% satisfaction
I must order a .010" just because
Gary

The Water Slide Takamine Decal was too dark & not enough Gold to even show up on the rosewood veneer I ordered a Gold Sticker Decal & have went ahead & cut the new nut, lowered the saddle + strung up with .012"-.056" D'Addario phosphor bronze strings & await the decal, Not ...

I have the headstocks finish sanded back to 2000 now & am ready to apply the Takamine Logo Might get around to that later today = Then wait a few days for it to dry really good & then spray a few more coats of clear over the logo & sand back flush & then a final coat Takes way too mu...

Getting closer
2nd layer of clear after being sanded back too 2000 grit
One single layer sprayed thin
At least I'm doing something
More to come SOON!
Gary

Finishing up the headstock of the Takamine Getting close, needs a coat of clear before the water slide logo is applied & being the humidity is 100% & it's 100 degrees outside I will hold off I have it sanded to 2000 grit & it's smooth as glass Made a short neck rest & lined it with t...

Still sanding & filling & trying to color match the wounds Found a divot in the neck & filled it + color & stained the cracks glue & will set it with CA Glue Slow process & still need to even up the veneer at the curved areas MORE TO COME! Still looking for those three Parker...

MORE SANDING :( P6110001.JPG P6110002.JPG P6110003.JPG P6110007.JPG P6110002 (1).JPG Found the six little gold screws for the tuners They were in a shot glass on my other work bench... Trying to find a color match for the crack = Stain markers Still looking for those three Parker Fly Supreme Black R...

More sanding & slow Dremel work on the overhang of the headstock veneer of the Takamine Acoustic Guitar... It is almost impossible to sand the edge of the rosewood without touching the side of the headstock which looks like mahogany to me through the finish I have been using 220 grit on or aroun...

Been working on the headstock of the Takamine I drilled six little holes & put six little brads upside down in the headstock with 1mm protrusion to keep the veneer from slipping around & set them with #10 CA glue to mark the veneer & keep it from slipping around on the glue Got four clam...

GC should list it on eBay with a starting bid of what they have in it = $600 or less & let the bids begin...
Too Bad Really..
I didn't see the thread about that guitar before

I once had a bone nut cut at GC & they ruined the guitar + charged me $70 = NEVER AGAIN!
It was a Gibson Blueshawk BTW